OCTAGON SX888 IP H.265 HD IPTV Set-Top Box Review

By
Zohan
-

OCTAGON SX888 IP H.265 HD IPTV Set-Top Box Review

OCTAGON SX888 IP H.265 HD IPTV Set-Top Box Review

OCTAGON SX888 IP H.265 HD IPTV Set-Top Box Description

OCTAGON SX888 IP – H.265 HD IPTV Set Top Box
The OCTAGON SX888 H.265 HD is the evolution of the SX series now with even better performance and optimized for IPTV streaming. The device is only 11cm x 11cm x 2cm small. This product meets all broadband requirements set by the provider. In this context, the end user is afforded unsurpassed ease of use. The Octagon SX888 meets all the modern needs of a multimedia device, including support for streaming media, video on demand (VoD), high quality digital video playback, and access to OTT content (Stalker, XTREAM IP (IPTV), YouTube, RedTube, Internet Radio + (web radio) and others) and even includes a web browser.
With the Octagon SX888 H.265 HD, viewers can fully exploit the variety of multimedia options such as Stalker, XTREAM IP (IPTV), YouTube, RedTube, Internet Radio + (web radio) and more.

Key Features :

  1. – H.265 HD Processor
  2. – GX3201H National Chipset 32-bit
  3. – CK610M 600MHz
  4. – 2GBit RAM DDR3 (256MB)
  5. – 1GBit Flash SPI NAND (128MB)
  6. – HDMI 1.4 & S / PDIF

Features:

  1. – H.265 HD IPTV Set-Top Box
  2. – Stalker & Xtream TV
  3. – WebTV & VOD Video Club
  4. – IPTV m3u, m3u8, m3u8plus, Autoget m3u
  5. – Custom IPTV Portal and Logo Support
  6. – Internet Radio & YouTube
  7. – 2x USB 2.0 Ports
  8. – User friendly OSD interface – WebIF & FTP access
  9. – Network 10 / 100Mbit LAN RJ45
  10. – WiFi (WLAN) up to 300MBit via USB
  11. – 3GB modem via USB
  12. – DLNA Player
  13. – Built-in media player
  14. – iOS and Android app (.apk) Remote control & Web browser
  15. – EPG – Electronic program guide
  16. – 4x programmable buttons on the remote control
  17. – 3x direct buttons for WebTV, VOD and YouTube
  18. – 0.5W Stand-by
  19. – Dimensions (LxDxH) 110mm x 110mm x 20mm

Front:

  1. – LED display (green / red)
  2. – IR sensor (infrared receiver)

Rear Panel:

  1. – HDMI Output
  2. – Digital Audio Jack (S / PDIF)
  3. – AV – Audio Video Jack – Jack to RCA
  4. – Network 10 / 100Mbit Connection
  5. – DC 5V Power Supply

Side (left):

  1. – 2 x USB 2.0 port
  2. – RS232 socket
Previous articleOCTAGON SX88 + H.265 HD Review
Next articleOCTAGON SF1028P Specifications Must read before you buy

RELATED ARTICLESMORE FROM AUTHOR

4 COMMENTS

  1. Octagon SX888 4K keeps freezing on a regular basis. Will there be a Firmware to fix this issue?

  2. I have the same issue ( freezing)but on HD only?Does not matter how many times I clear.I am new to IPTV and wonder if I would have been better off with a Sat dish.

  3. 1. Connect Receiver with HDMI cable to Television.
    2. Press and keep RESET Button on bottom panel
    3. Connect Power cable (Turn on box).
    4. On the front panel you will see “UPG” .. after few seconds STB will show USB
    Update Menu.
    5. Prepare USB Stick FAT32 formatted and copy Firmware to USB Stick
    6. Connect USB Stick with Receiver.
    7. Remote Control: Press Red Button and select Firmware file.
    8. Start with OK button and wait installing.
    Good Luck, Repair should be done

What are you Looking for?