Amiko x Finder 3 Review

805

Amiko x Finder 3 Review

Amiko x Finder 3 Review

Amiko X-Finder 3 Description

If you need a professional device for setting up a television broadcast, you have come to the right place. Amiko X-Finder 3 is the device you need. These are the most advanced technologies and maximum customization flexibility. With it, you can configure the satellite, terrestrial, cable signal. The device has a large set of features and excellent characteristics.

Amiko X-Finder 3 Specifications

  1. Satellite, T2 / T Ground and Cable Measurement

  2. A full-featured portable set-top box

  3. 7-inch color display

  4. Built-in Conax Card Reader

  5. One common interface slot

  6. BNC for analog camera input

  7. Satellite blind scan support

  8. Spectrum analyzer

  9. Calculation of the satellite antenna angle

  10. Constellation measurement

  11. Calculation and display of dynamic errors

  12. High-speed USB 2.0 connection

  13. Multimedia playback (MP3, MP4, MKV, AVI, MPG, etc.)

  14. Ethernet connection

  15. USB WiFi support (Ralink RT5370 chipset)

  16. Full HD video output (1080p) via HDMI

  17. DC 12V output connection

  18. Unicable & DiSEqC 1.0, 1.1, 1.2 and USALS support

  19. Simple database management and USB transfer

  20. Easy software update via USB and Internet

Equipment

  1. Remote control

  2. Car charger

  3. Two pens for left and right-hand use

  4. Built-in stand

System resources:

  1. Main processor: 800 MHz processor

  2. Flash Memory: 64 Mbps

  3. DDR RAM: 2048 Mbit

Satellite tuner configuration:

  1. – Tuner type: DVB-S / DVB-S2

  2. – Input connector: F-type connector, female connector

  3. – Frequency range: 950 MHz – 2150 MHz

  4. – Signal level: from -65 to -25 dBm

  5. – LNB Power & Polarization: Vertical: + 13V; Horizontal: + 18V; Current: 300 mA max; Overload protection

  6. – 22KHz Tone: 22 ± 1KHz

  7. – DiSEqC control: Amplitude: 0.6 ± 0.02 V; Version 1.0, 1.1, 1.2, USALS

  8. – Demodulation: QPSK, 8PSK

  9. – Character input speed: 2-45 Mbps, conversion speed

  10. – FEC: 1/2, 2/3, 3/4, 5/6, 7/8, 1/4, 1/3, 2/5, 3/5, 4/5, 8/9, 9/10

Ground Tuner Configuration:

  1. – Tuner type: DVB-T / DVB-T2

  2. – Input connector: IEC type connector, female connector

  3. – Signal level: compatible with Nordic, compatible with DBOOK

  4. – FEC: DVB-T: Viterbi + Reed Solomon 1/2, 2/3, 3/4, 5/6, 7/8; DVB-T2: LPDC + BCH 1/2, 3/5, 2/3, 3/4, 5/6

  5. – Frequency range: 47-862 MHz

  6. – Demodulation: QPSK, 16QAM, 64QAM, 256QAM (with or without rotation)

  7. – Protective interval: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128

  8. – FFT mode: 1k, 2k, 4k, 8k, 16k, 32k normal and advanced

  9. – Channel bandwidth: 6/7/8 MHz

  10. – Antenna output power: 5 V 50 mA max.

  11. – Demodulation: COFDM 2K / 8K

Cable tuner configuration:

  1. – Tuner type: DVB-C

  2. – Input connector: IEC type connector, female connector

  3. – Frequency range: 47-862 MHz

  4. – Signal level: -20 dBmV – + 20 dBmV

  5. – Bandwidth: 8 MHz

  6. – Demodulation: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM

  7. – Character input speed: 1.5 – 7Ms / s

MPEG TS A / V decoding options:

  1. – Transport stream: MPEG-2, H.265

  2. – Input speed: no more than 120 Mbps

  3. – Aspect ratio: 4: 3, 16: 9

  4. – Video decoding: MPEG-2, MP @ ML, MPEG-4 part 10 / H.264, H.265

  5. – Audio decoding: MPEG-1 level I / II, MPEG2 level II, Dolby Digital, AAC

  6. – Audio Mode: Left, Right, Stereo, Mono

  7. – Sampling frequency: 32, 44.1, 48 kHz

A / V and data input / output:

  1. – Video B: Type BNC, analog video input

  2. – USB: high-speed USB2.0 connection (type A)

  3. – HD OUT: HDMI Ver 1.3, type A

  4. – Ethernet: RJ45 10 / 100M

Power supply:

  1. – Input voltage: AC 100-240 V 50/60 Hz

  2. – Output voltage: DC 12V 4.5A max

  3. – Power consumption: 48 W max.

  4. – Battery: 7.4V 6.3Ah

  5. – Battery charging time: 3.5 hours

  6. – Battery discharge time: up to 6-7 hours

Physical characteristics:

  1. – LCD display: 7 inches

  2. – Size: 275 mm x 175 mm x 50 mm (WxHxD)

  3. – Net weight: <2.0 kg

  4. – Operating temperature: 0 – + 45 ° C

  5. – Storage temperature: -10 – + 70 ° C

  6. – Storage humidity: 5% -95% relative humidity (non-condensing)

Leave a Reply